色花堂

sand making machine

cause of issue:

1. The material in the crushing cavity is blocked;

2. The triangle belt is too loose;

3. The working voltage is inappropriate and too low;

4. Internal parts fall off;

5. The impeller is stuck;

6. The bearing is locked or the spindle is broken;

7. There is a problem with the equipment connection line, breakage or poor contact.

Solution:

1. Shut down the machine, clean the materials, prohibit large particle size or high moisture content materials from entering the machine, feed the materials evenly, and avoid excessive feeding;

2. Adjust the tightness of the triangle belt;

3. Select the voltage to meet the equipment requirements;

4. Carry out internal inspection of the equipment;

5. Strictly control the hardness of materials and prohibit non-crushed materials from entering;

6. Repair or replace the worn spindle;

7. Check the connecting cable and repair it.