色花堂

Vibrating feeder is a commonly used feeding equipment, which can evenly and continuously send lumpy or granular materials to receiving equipment during production, and is the first process of the entire production line. Afterwards, it is often crushed with the jaw crusher. The working efficiency of the vibrating feeder not only has an important impact on the production capacity of the jaw crusher, but also has an impact on the production efficiency of the entire production line. The reason for the slow feeding of the vibrating feeder is what?
 

1. The inclination of the chute is not enough

Solution: adjust the installation angle. Choose the fixed positions at both ends of the raised/lowered feeder according to the site conditions.

2. The angle between the eccentric blocks at both ends of the vibration motor is inconsistent

Solution: Adjust by checking whether the two vibration motors are consistent.

vibrating feeder
 

3. The vibration direction of the vibration motor is consistent

Solution: It is necessary to adjust the wiring of any one of the vibrating motors to ensure that the two motors run in reverse and ensure that the vibration track of the vibrating feeder is a straight line.

4. The excitation force of the vibration motor is not enough

Solution: It can be adjusted by adjusting the position of the eccentric block (the adjustment of the exciting force is realized by adjusting the phase of the eccentric block, one of the two eccentric blocks is fixed and the other is movable, just loosen the bolts of the movable eccentric block, the two When the phases of the eccentric blocks are coincident, the exciting force becomes larger and decreases in turn; when adjusting, the phases of the eccentric blocks of the same group of motors should be consistent).